Dpc watchdog violation blue screen error is one of the most frequent BSOD errors on Windows 10. This issue can be caused by a variety of reasons.
If you’re experiencing this BSOD error, it’s time to begin searching for its cause. First, disconnect any peripherals not in use in order to rule out hardware issues.
1. Check for Updates
If you encounter the DPC watchdog violation error on your Windows 11 laptop, it could be due to system file corruption. If this is the case, you can utilize some built-in utilities to repair the issue by locating and replacing corrupted files with healthy counterparts.
You can do this by running SFC (System File Checker) and DISM (Deployment Image Servicing and Management). Both of these tools will scan your system files for corrupted ones and replace them with fresh copies.
You can run a Chkdsk scan to fix any problems with your storage drivers. This may help correct errors on the SSD that could be causing the DPC Watchdog Violation error to appear.
2. Restart
A DPC Watchdog violation blue screen error is one of the most frustrating issues Windows 11 laptops may experience. This error could be due to many causes, from malfunctioning hardware to corrupt system files.
Thankfully, there are multiple solutions to resolve the problem. If you’re having difficulty pinpointing its cause, try restarting your computer to see if that helps.
If that doesn’t help, you can try running a Chkdsk scan on your hard drive to verify its integrity and fix any damaged files. Note that this may take some time so be patient.
Event Viewer can be used to identify which driver or device is causing the DPC watchdog violation blue screen error. Once identified, you can remove that driver/device to resolve the problem.
3. Run System Restore
System Restore is an invaluable feature in Windows that enables you to restore your system’s state to an earlier point in time. It can be incredibly helpful for fixing issues caused by installing or altering software, drivers, or the Registry.
If you’re having issues with your Windows 11 laptop, running System Restore may be worth trying to resolve the problem. Be patient as this process can take some time as System Restore recreates all your data files from scratch; thus, be patient.
First, confirm that System Restore protection is enabled for your system drive (C:). Do this by opening the System Properties window from Control Panel and confirming this setting.
4. Run Chkdsk
Windows operating systems often provide command-line utilities to assist with data storage management. One such utility, chkdsk, allows you to check for and correct errors on storage drives with ease.
This utility primarily functions to detect logical file system errors. It may also attempt to recover bad sectors on your disk that could lead to data loss.
The chkdsk /f option allows you to run the utility on any drive, regardless of its letter. This command works even on drives without Windows installed, such as external hard drives and SSDs.
Be aware that the chkdsk repair command may take some time to complete. This could be because the drive must be unmounted and all programs closed before it can begin.
5. Reset to Factory Settings
A factory reset is a method to return the system to its original settings, wiping out all custom modifications and replacing them with those included with the computer. This can be especially helpful when dealing with software issues or wanting to clear out previous users’ profiles and data.
There are a few ways to do this, but the most straightforward method is through Windows System Recovery Tool. To begin, launch the recovery tool and then restart your laptop.
You can also use a disk check tool to scan through your computer’s drive for errors that need fixing. However, this process will take some time so be patient.
