If you encounter the dpc watchdog violation random blue screen error, it could indicate that something is amiss with your PC. This could be due to a hardware conflict, an outdated device driver, or corrupted Windows installation file.
One of the best ways to determine what’s causing it is running a disk check. This will scan for any bad sectors on your hard drive and repair them if necessary.
Causes
A dpc watchdog violation random is a widespread blue screen error that can cause your computer to malfunction or even crash. It could be caused by several factors, such as outdated drives, unsupported SSD firmware, hardware incompatibilities and corrupt system files.
One of the most frequent causes of this error is an incompatible SSD driver. This issue tends to arise when Windows 10 first starts up, since manufacturers rarely create updated drivers specifically for the OS.
However, running a CHKDSK scan on your HDD can resolve the problem. While the process may take some time, it should provide satisfactory results in the end.
One possible solution for this issue is to upgrade the firmware on your SSD. This should resolve the error for most users.
If these solutions don’t solve the issue, it could be indicative of a more serious issue. You may need to replace hardware or take other preventive measures in order to guarantee its continued functionality.
Solution 1: Disconnect all USB devices
If you’re experiencing issues with any of your USB devices, it is best to disconnect them all and see if that resolves the problem. Doing this will allow you to determine if the issue lies within your PC or with a specific USB device.
If the dpc watchdog violation random error persists after disconnecting your USB devices, there’s a good chance Windows has disabled the drivers that power your device. To fix this, press Win + X and select Device Manager to expand the Universal Serial Bus controllers section of Windows.
Once you’ve done that, right-click your USB device and select Update Driver. This will automatically search for and install any driver updates that may be available. Now test the device again to confirm if everything is functioning normally – if so, the issue should now be resolved.
Solution 2: Check the power supply
When encountering the dpc watchdog violation random error, the first thing you should do is check your power supply. This could be the source of the issue.
One way to determine whether an error exists on your computer is by disconnecting all external devices except for keyboard and mouse. After disconnecting all external devices, restart your computer and see whether the issue persists or not.
Once all external devices have been disconnected, you have likely identified the source of your BSOD error. This could have been an external hard drive, solid-state drive, printer, scanner or other similar hardware.
If the error still occurs, you should try updating your SSD firmware. This may resolve the problem and prevent dpc watchdog violation random blue screen errors in the future.
Solution 3: Run a full system scan
A DPC watchdog violation random error indicates that Windows needs to update its hardware drivers or your drive has files which the current version of Windows doesn’t support. You can fix this problem by running a full system scan which will thoroughly check your computer for any viruses or malicious content.
This can be a quick and effortless way to get your computer up and running again, but make sure all the essential parts of your PC (the master boot record and boot sector) are included. These areas are particularly vulnerable to viruses, so they must be scanned in order to prevent any destruction.
Furthermore, you should run a system file checker to detect corrupted system files that could be the cause of the DPC watchdog violation random error. You can do this using SFC and DISM, which will replace damaged files with healthy equivalents.
