Fixed the inability to view and access shared folders in Windows 10

  • Many Windows 10 users report that Windows cannot access a shared folder on their PC.
  • This can be a problem, and in today’s article, we will show you how to fix this problem.
  • The inability to access network shares can be very annoying.
  • If other computers can see shared folders and yours cannot, you need to fix the problem.

 

Unlock the hidden potential of shared folders in Windows 10 as we delve into the frustrating issue of being unable to access or view them. Discover the essential fixes that will restore harmony to your file-sharing experience and empower you to seamlessly collaborate with others.

Setting up a Shared Network Folder in Windows 10

To set up a shared network folder in Windows 10, follow these steps:

1. Open File Explorer and navigate to the folder you want to share.
2. Right-click on the folder and select “Properties” from the menu.
3. In the Properties window, go to the “Sharing” tab.
4. Click on the “Advanced Sharing…” button.
5. Check the box that says “Share this folder.”
6. Click on the “Permissions” button to set the access permissions for the shared folder.
7. In the Permissions window, you can add or remove users and set their permission levels.
8. Click “OK” to save the changes and close the Permissions window.
9. Click “OK” again to save the changes and close the Properties window.

Once the shared folder is set up, other computers on the same network will be able to access it. Remember to check your network settings and permissions if you encounter any issues.

For more information and troubleshooting steps, refer to the article titled “Inability to Access or View Shared Folders in Windows 10 and How to Fix” by Ivan Jenic and Alex Serban.

PC Cannot See Shared Folders in Windows 10

If your PC is unable to see shared folders in Windows 10, there are a few steps you can take to fix the issue. First, make sure that network discovery is enabled on your PC. Open the Control Panel and go to “Network and Sharing Center.” Under “Advanced sharing settings,” ensure that network discovery is turned on.

Next, check the startup type of the Function Discovery Provider Host and Function Discovery Resource Publication services. Open the Command Prompt and enter “net start FDResPub” and “net start FDHost.” If the startup type is set to “Manual,” change it to “Automatic” by going to the Services window in the Control Panel.

If you still cannot see the shared folders, there may be other factors at play such as PC system issues or network errors. It’s recommended to consult with a specialist or contact Microsoft support for further assistance.

Enable Network Sharing and Discovery

To enable network sharing and discovery in Windows 10, follow these steps:

1. Open Control Panel and click on “Network and Sharing Center.”
2. Click on “Change advanced sharing settings” on the left side.
3. Under the “Private” network profile, make sure “Turn on network discovery” and “Turn on file and printer sharing” are selected.
4. Scroll down to the “All Networks” section and ensure that “Turn off password protected sharing” is selected.
5. Click on “Save changes.”

If you’re still unable to access or view shared folders, try these additional troubleshooting steps:

1. Press the Windows key + X and select “Command Prompt (Admin).”
2. Enter the command “net use * /delete” to remove any existing connections.
3. Open File Explorer and click on “This PC.”
4. Click on “Map network drive” and select a drive letter.
5. Enter the path to the shared folder (e.g., “\\DeviceName\FolderName”) and click “Finish.”

If you continue to experience issues, it may be helpful to consult Microsoft support or reach out to a specialized IT professional for further assistance.

Check PC’s Credentials for Shared Folder Access

To check your PC’s credentials for shared folder access in Windows 10, follow these steps:

1. Open Control Panel.
2. Click on “Network and Sharing Center”.
3. Under the “View your active networks” section, you will see your network’s name and type. Make sure it is set to “Private” for better sharing experience.
4. Click on “Change advanced sharing settings” on the left-hand side.
5. Expand the “All Networks” section.
6. Scroll down to the “Password protected sharing” option and make sure it is turned on.
7. If you are still unable to access or view shared folders, try using the net use command in Command Prompt to connect to the shared folder using the format \\DeviceName\SharedFolderName.
8. If the issue persists, it may be caused by other factors such as firewall settings or network discovery feature. You can try disabling the firewall temporarily or enabling network discovery feature in Windows Explorer.
9. If you are part of a work network, contact your network administrator for assistance.

Remember to always exercise caution when sharing folders and only grant permission to trusted users or devices.

Enable All Network Services for Shared Folder Access

To enable all network services for shared folder access in Windows 10, follow these steps:

1. Open the Explorer on your Windows 10 device.
2. Press the Windows key + R to open the Run dialog box.
3. Type “services.msc” and press Enter to open the Services window.
4. Scroll down and locate the “Function Discovery Provider Host” and “Function Discovery Resource Publication” services.
5. Right-click on each service and select Properties.
6. In the Startup type property, select “Automatic” from the drop-down menu.
7. Click Apply and then OK to save the changes.
8. Repeat steps 5-7 for the “SSDP Discovery” and “UPnP Device Host” services.
9. Close the Services window and restart your computer.

By enabling these services, you should now be able to access and view shared folders on your Windows 10 device. If you continue to experience issues, it may be helpful to consult the event viewer or seek further support from Microsoft’s Office support feature.

Troubleshooting Error Code: 0x80004005

  1. Check Network Settings
    • Ensure that you are connected to the network and have a stable internet connection.
      Check Network Settings
Ensure that you are connected to the network and have a stable internet connection.
    • Verify that the network cables are securely connected.
    • Restart your router or modem to refresh the network connection.
  2. Disable Firewall and Antivirus
    • Temporarily disable your firewall and antivirus software.
    • Open Windows Security by searching for it in the Start menu.
    • Click on Firewall & network protection and turn off the firewall.
    • Go to your antivirus software and disable its real-time scanning feature.
      Click on Firewall & network protection and turn off the firewall.
Go to your antivirus software and disable its real-time scanning feature.
  3. Reset TCP/IP Stack
    • Open Command Prompt as an administrator by right-clicking on the Start button and selecting it from the menu.
    • Type the following command and press Enter: netsh int ip reset
      Open Command Prompt as an administrator by right-clicking on the Start button and selecting it from the menu.
Type the following command and press Enter: netsh int ip reset
    • Restart your computer to apply the changes.
  4. Clear Windows Store Cache
    • Open Command Prompt as an administrator.
    • Type the following command and press Enter: wsreset.exe
      Open Command Prompt as an administrator.
Type the following command and press Enter: wsreset.exe
    • Wait for the process to complete and then restart your computer.
  5. Run Windows Troubleshooter
    • Open Settings by clicking on the Start button and selecting it from the menu.
    • Go to Update & Security and click on Troubleshoot in the left sidebar.
      Open Settings by clicking on the Start button and selecting it from the menu.
Go to Update & Security and click on Troubleshoot in the left sidebar.
    • Select Windows Store Apps and click on Run the troubleshooter.
    • Follow the on-screen instructions to complete the troubleshooting process.
  6. Reset Windows Socket
    • Open Command Prompt as an administrator.
    • Type the following command and press Enter: netsh winsock reset
      Open Command Prompt as an administrator.
Type the following command and press Enter: netsh winsock reset
    • Restart your computer for the changes to take effect.
  7. Reinstall Network Adapter
    • Open Device Manager by right-clicking on the Start button and selecting it from the menu.
    • Expand the Network adapters category.
    • Right-click on your network adapter and select Uninstall device.
    • Restart your computer, and Windows will automatically reinstall the network adapter.
      Right-click on your network adapter and select Uninstall device.
Restart your computer, and Windows will automatically reinstall the network adapter.
  8. Perform System File Check
    • Open Command Prompt as an administrator.
    • Type the following command and press Enter: sfc /scannow
      Open Command Prompt as an administrator.
Type the following command and press Enter: sfc /scannow
    • Wait for the scan to complete and restart your computer.
  9. Check for Windows Updates
    • Open Settings by clicking on the Start button and selecting it from the menu.
    • Go to Update & Security and click on Windows Update.
    • Click on Check for updates and install any available updates.
    • Restart your computer to apply the updates.
      Click on Check for updates and install any available updates.
Restart your computer to apply the updates.
Website | + posts

Mark Ginter is a tech blogger with a passion for all things gadgets and gizmos. A self-proclaimed "geek", Mark has been blogging about technology for over 15 years. His blog, techquack.com, covers a wide range of topics including new product releases, industry news, and tips and tricks for getting the most out of your devices. If you're looking for someone who can keep you up-to-date with all the latest tech news and developments, then be sure to follow him over at Microsoft.