How Do I Fix a DPC Watchdog Violation Error?

how do i fix dpc watchdog violation error

Have you been having difficulty booting up your computer or running certain software programs? The dpc watchdog violation error may be to blame. This blue screen error can be extremely frustrating and even lead to system damage if left untreated.

Error messages may appear due to a software or hardware incompatibility issue. To check for this, run the Program Compatibility Troubleshooter.

1. Restart the computer

DPC (Deferred Procedure Call) is the watchdog in your computer system; it monitors or tracks all Windows programs and performance. If it detects an issue, it will issue a DPC watchdog violation message.

The DPC watchdog violation error can be caused by a variety of reasons, such as incompatible hardware devices, software conflicts and outdated drivers. Fortunately, there are several methods available to fix this blue screen error.

Before you begin, ensure all external devices plugged into your computer are disconnected except for your keyboard and mouse. After doing this, restart your computer.

2. Run a disk check

If you are experiencing a DPC watchdog violation error, the first step should be running a disk check. This will help identify any corrupted or damaged system files that could be causing the issue.

To complete this operation, log in as an administrator and open a command prompt window. Type “chkdsk /f /r /x” and hit Enter.

This will scan the entire drive and correct any errors it finds. Additionally, it may disconnect the drive if needed.

If the DPC watchdog violation error is due to a solid state drive, you may need to update its firmware. Doing so will enable Windows to communicate with the SSD faster and prevent future incidents from arising.

3. Reinstall the operating system

Windows blue screen error DPC watchdog violation can be caused by a variety of issues, such as outdated device drivers, software conflicts, corrupted SSD firmware and corrupted system files.

One of the most effective fixes for BSoD is running a disk check. This will scan your hard drive and detect any corrupted sectors.

Another solution is to reinstall the operating system. This will eliminate any unneeded updates or programs you may have installed.

Reinstalling the operating system on your computer can be done either by setting it to a previous restore point or retrieving it from a backup file. Reinstallation will remove any unsupported or damaged hardware as well as unnecessary updates and software.

4. Update the drivers

If you are encountering a dpc watchdog violation error, it is imperative to update the drivers. Doing so will allow your system to run optimally and smoothly.

One way to accomplish this is by updating the driver software for your SSD. Doing so will enable Windows automatically download and install new firmware for your drive.

A DPC watchdog violation error could be caused by incompatible hardware devices or conflicting software programs.

To determine if this is the cause of the issue, disconnect all external devices (including USB flash drives) and plug them back in one at a time. If the error stops appearing, you have identified its source.

5. Reinstall the software

The dpc watchdog violation error can often be traced back to an outdated or corrupt device driver. To ensure the best performance, ensure all drivers are installed properly before restarting your computer.

Another potential cause is incompatible hardware. For instance, if your PC uses an SSD and its firmware is outdated or unsupported, this could result in this error message.

You can try updating the SSD firmware to resolve this issue. To do this, visit the manufacturer’s website and download the most up-to-date version of firmware for your SSD.

This solution may be one of the simplest methods for resolving blue screen errors, but it may not work for everyone.

Website | + posts