How to Repair ‘Diskpart has Encountered an Error – The Parameter is Incorrect’ Issue

“DiskPart encountered an error: parameter incorrect” may occur when trying to format a disk with the “format fs=ntfs” command using the DiskPart tool. The error occurs after the formatting process has reached 100%, for no apparent reason. DiskPart is a powerful hard disk utility that is often used to manage hard disks, partitions or volumes that cannot be managed using the Windows Disk Manager options. For example, if you have a hard drive, USB drive, or SD card that Windows cannot format because of data corruption or other problems, you can use the DiskPart tool to format the drive.

The DiskPart tool should be used with great caution as it can REMOVE everything on the selected hard drive. So before you use this tool, make sure that you already have a backup of your data on another medium. In this guide, you will find detailed instructions on how to fix the “DiskPart encountered an error: parameter is incorrect” error.

What causes the “DiskPart encountered an error: parameter is incorrect” problem?

If the device you want to clear or format is considered locked (such as write-protected) or unauthorized, the DiskPart command usually cannot be executed correctly. For example, you are not logged in as an administrator, because some user accounts may not be allowed to use the command line even if you run it as an administrator. Some of the reasons that cause this error are as follows:

  • Access denied.
  • I/O device error.
  • Incorrect configuration.
  • The device is not ready.
  • The data carrier is write-protected.
  • Data error (cyclic redundancy check).
  • The system cannot find the specified file.

How do I solve the “diskpart encountered an error: parameter is incorrect” error?

Perform an SFC scan

Windows 10 is a wonderful operating system that is constantly improving. One feature that has been improved in recent years is the sfc scan. This tool can help to repair corrupted files and improve your computer’s performance. Here are some simple steps to follow in order to perform an sfc scan on Windows 10:

  1. Open the Start Menu and type “Command Prompt” into the search box.
  2. Right-click on the Command Prompt shortcut and select “Run as administrator.”
  3. Type “sfc /scannow” into the command prompt and press Enter.
  4. The scan will now begin; this may take some time, so please be patient.
  5. Once the scan is complete, restart your computer and see if the issue has been resolved.

By following these simple steps, you can easily perform an sfc scan on Windows 10 and help to keep your computer running smoothly.

Run the Check Disk utility

  1. Assuming that you have a computer running Windows 10, the first thing you’ll need to do is open the file explorer. To do this, simply click on the folder icon in the taskbar.
  2. Once the file explorer window opens, you’ll need to find the drive that you want to check for errors. Right-click on the drive and select “Properties” from the drop-down menu.
  3. In the properties window, click on the “Tools” tab and then click on the “Check” button. This will bring up the check disk utility. The check disk utility will scan your drive for errors and attempt to fix them.

Depending on the size of your drive, this process can take some time to complete. Once it’s finished, you should see a message indicating that your drive has been checked and no errors were found.

Changing the data transfer mode

  1. Right-click on this computer.
  2. Select Manage.
  3. In the left pane, select Device Manager.
  4. Expand the IDE ATA/ATAPI Controller in the right pane.
  5. Right-click the target channel that caused the I/O device error.
  6. Select Properties.
  7. Switch to the Advanced Settings tab.
  8. Change the transmission mode to PIO only.
  9. Click the OK button to confirm.

Checking Hardware Connections

Since loose hardware connections are a common cause of device errors, make sure that all cables are connected correctly and correctly.

  1. If the error is caused by an external device, such as an external hard disk drive, you can connect the drive to a different USB port on the computer.
  2. If the device is connected via a USB hub, connect the drive directly to a USB port on your computer if there is insufficient power.
  3. Replace the cable with a new one and reconnect the storage device.
  4. If you are an advanced computer user, you can replace the internal hard drive cables for desktops or external hard drive enclosures. If you are a casual user, you should seek professional help.

Perform hardware and device troubleshooting

As anyone who has ever used a computer knows, hardware and device issues are inevitable. Whether it’s a printer that won’t print or a mouse that keeps freezing, these problems can be frustrating and difficult to solve. Fortunately, Windows 10 comes with a built-in troubleshooter that can help resolve many common hardware and device issues. Here’s a step-by-step guide on how to run the hardware and device troubleshooter on Windows 10:

  1. Type ‘troubleshoot’ into the search box on the taskbar and select ‘Troubleshoot’ from the results.
  2. On the Troubleshoot page, select ‘Hardware and Devices’ and click ‘Run the troubleshooter’.
  3. The troubleshooter will now scan your computer for any hardware or device issues and attempt to resolve them.
  4. Once the troubleshooter has finished, you should restart your computer to see if the issue has been resolved.

By following these simple steps, you can quickly and easily run the hardware and device troubleshooter on Windows 10 whenever you encounter an issue with your computer’s hardware or devices.

Frequently Asked Questions

If you are encountering this error, it is likely due to an issue with your computer's hard drive. To resolve this issue, you can run the Check Disk utility to scan your drive for errors and fix them. You can also try changing the data transfer mode or checking the hardware connections. If these methods do not work, you can try running the Hardware and Device troubleshooter.

There are several potential causes for this error, including issues with the hard drive, data transfer mode, or hardware connections.

The symptoms of this error can vary depending on the cause. However, common symptoms include slow performance, freezes, and data loss.