What is blue screen stop code dpc watchdog violation? This is a common error that may appear on your Windows system.
This error typically indicates a problem with your SSD driver or hardware device.
To resolve the problem, update your drivers or disconnect any external devices. Additionally, run a disk check to determine if your hard drive is in good condition.
Causes
A blue screen stop code dpc watchdog violation is a severe error that can cause your computer to shutdown immediately. This occurs when a system process, such as the bug checker, doesn’t receive an response from a component within 100 microseconds.
Error 385 can be one of the most frustrating issues you’ll face on your Windows computer. Typically, this error appears when trying to run a program or installing an additional software application.
Typically, blue screen errors occur when the device drivers for your graphics card and SSD are outdated or installed incorrectly. Furthermore, software conflicts could also be the source of this issue.
In order to prevent future issues, it’s recommended that you regularly back up your Windows 10 system. AOMEI Backupper Standard is an user-friendly and free backup tool which enables the creation of both system backups and bootable media for Windows 10.
Solution 1: Update Your Drivers
Updating drivers is an excellent way to enhance your computer’s performance. Not only do they speed up operations, but they may also fix bugs and add security measures.
Updating your drivers is the simplest solution – use a driver updater software. These programs automatically detect your hardware and download the correct drivers from the device manufacturer’s website.
This process is incredibly straightforward and free of charge. All that’s required for you to do is download the program, install it on your PC, and let it scan for outdated drivers.
Once it’s complete, you can opt to either download and install the most current drivers or create a restore point. The latter option is recommended if you want your drivers backed up in case something goes awry later on.
Solution 2: Disconnect All External Devices
One of the primary causes of random disconnects is an inadequate power supply. This issue is especially prevalent for external USB devices like hard drives that need constant power to function properly.
Thankfully, there are a few steps you can take to resolve the problem and get your computer up and running again. First, disable the power save feature of the computer to see if that improves connectivity.
Once you’ve disconnected all external devices, including those not necessary for running your computer (like printers, digital cameras and smartphones), it can be easier to determine which device is causing the issue. With multiple plugged in at once, however, this step may take some time depending on which one has caused issues previously.
No guarantee that taking out all peripherals from your computer is the best solution for you, but at least give it a shot to see if it resolves your issue. If not, other solutions may work better in certain circumstances – just keep an eye on performance and if blue screen stop code dpc watchdog violation still occurs, then take another look at hardware and software setup.
Solution 3: Run a Disk Check
One of the quickest and most straightforward solutions to fix blue screen stop code dpc watchdog violations is running a disk check. This will scan your hard drive for issues and attempt to repair them or recover data from damaged sectors.
If the error is due to a problem with your SSD, updating its firmware can resolve the problem. To do this, log into Windows and open Device Manager.
You may want to update the drivers for any other storage devices as well. Doing so will guarantee that all your hardware is up-to-date and functioning optimally.
Another option is running CHKDSK, a command-line utility which will scan your hard drive for problems and attempt to repair them. Unfortunately, this can take some time so it’s best to schedule it to run when you next restart your computer.
