To fix the blue screen error 0x00000109

To fix the blue screen error 0x00000109

Have you recently encountered the error “0x00000109” on your PC and want to fix it immediately? If yes, then you have come to the right place, because this article will tell you all about this error and how to fix it.

This is an error that causes your computer to freeze, display a blue screen, or shut down completely. If you get this error, you won’t be able to see your desktop, you will only see a blue screen with an error code 0x00000109. The error code can take several forms, including :

Blue screen error 0x00000109
Stop 0x00000109
BSOD 0x00000109
Error 0x00000109

Displaying an error means that the kernel has detected critical and corrupted data or kernel code. The kernel is responsible for managing the computer’s hardware, which includes the processor and RAM. You could say that the kernel is an important part of your operating system. In short, the kernel is responsible for displaying critical problems in your computer, and when it is affected, many activities of your computer, its malfunction affects the hardware, drivers, processor, and RAM.

 

What is the cause of error 0x00000109?

What is the cause of error 0x00000109?

Inconsistency in the driver/third-party process: It turns out that this particular problem may be caused by a conflicting third-party application or a newly installed driver that affects your boot configuration data. In this case, you can solve the problem by booting your computer in safe mode and restoring it to a healthy state using the System Restore Utility.

Damage to system files: Damage to system files is the second most important cause of this particular shutdown error. If this scenario applies, the problem can be solved by running a set of built-in utilities (SFC and DISM) or by resetting each operating system component with a new installation or repair procedure.

 

To fix error 0x00000109

To fix error 0x00000109

Start in safe mode

Starting your computer in safe mode is the first thing you need to do to fix the BSOD error. Only necessary system programs and services should be started in safe mode during startup. If you manage to boot in safe mode, it shows that a third-party application or device driver caused error 0x00000109 by interfering with the operating system’s BCD (Boot Configuration Data).

Follow these simple steps to boot into safe mode:

  1. If the computer is currently on, press the power button until the system shuts down.
  2. Press the power button again to turn the computer on.
  3. After the first boot screen appears, press the F8 key repeatedly until the Advanced Startup Options menu appears.
  4. Use the down arrow key to select Enable Safe Mode, then press Enter (or you can just press F4 to execute the option immediately, so you don’t have to scroll through the options with the down arrow key).
  5. Wait until the startup sequence is complete.
Running the Windows Memory Diagnostic Tool

You need to check if you have a bad flash drive. The Windows Memory Diagnostic Tool is a built-in utility that you can use to find out if your computer has memory problems.

1.) Press the Windows logo + the R key to bring up the Run dialog box.
2.) Type Control Panel and press Enter.
3.) Select System and Security -> Administrative Tools.
4.) Find Windows Memory Diagnostics in the list and double-click it.

Note: You can quickly launch the tool by typing “mdsched.exe” in the Run dialog box and pressing Enter.

5.) Click on the “Restart now and check for problems (recommended)” option.
6.) After the scan is complete, the computer will reboot automatically.

You should now check the test results in the Event Viewer to see if you have a bad RAM module:

  1. Press the Windows logo key to open the Start menu.
  2. Type “eventvwr.exe” in the search bar and click it in the results to open the Event Viewer.
  3. Open the Windows Logs folder and right-click System.
  4. On the context menu, click Search.
  5. Now type “MemoryDiagnostics-Results” under “Find What”.
  6. Click on “Learn More” and close the search dialog box.
  7. Double-click the “MemoryDiagnostic-Results” list in the Event Viewer. If the message “Windows Memory Diagnostics checked your computer’s memory and found no errors,” then there is no defective memory module. However, if there are errors, it means that one of your RAM modules needs to be replaced.
Updating the device driver

If the shutdown error is caused by a problematic device driver, updating can help solve the problem. You can do this manually by following the instructions below:

  1. Press the Windows logo key + R.
  2. Type “devmgmt.msc” in the search box, then press OK or press Enter.
  3. Look for devices that have a yellow rectangle with an exclamation mark in the middle. This indicates that there are problems with them.
  4. Right-click the device you want to update, and then click Update Driver Software.

Note: You can easily restore all defective, outdated, and missing drivers using a third-party program. The utility will scan for driver problems and then download and install the latest manufacturer-recommended versions of the necessary drivers.

Perform System Restore

After starting up in safe mode, performing a system restore is an easy way to fix the 0x00000109 shutdown error. This will restore the system to a previous state where the problem did not exist.

To run the system restore utility :

  1. Enter the Run dialog box by pressing the Windows + R key combination on your keyboard.
  2. Type “rstrui” and press Enter or press OK.
  3. Once you are in the System Restore Wizard, click Next.
  4. Now check the “Show more recovery points” box.
  5. Select the appropriate restore point (the one you had before the error occurred).
  6. Click Next -> Finish.
  7. Once the process is complete, your computer will automatically reboot.

Note: Note that applications, drivers, settings, etc. that were not deployed on your PC at the time of the selected restore point will no longer be present after the system restore is complete.

 

Frequently Asked Questions

Blue screens are usually caused by problems with hardware or driver software. Sometimes they can also be caused by problems with low-level software running in the Windows kernel. Common applications usually cannot cause blue screens.

  1. Go to "My Computer" and right-click.
  2. Go to "Real Estate."
  3. Go to the "Advanced" tab.
  4. Go to "Startup and Recovery" and click "Settings".
  5. Go to "System Errors" and uncheck "Auto Restart".
  6. Save your settings by clicking OK.

If the blue screen is caused by something installed on your computer, such as drivers, etc., reformatting can fix the problem. If it's caused by faulty hardware, no. If you have a spare hard drive, you can install a new Windows 10 and see if the blue screens go away.

Actually, the purpose of BSoD is to protect your hardware. When Windows senses that something might cause real damage, it shuts everything down, resulting in the infamous Blue Screen of Death. Although BSoD doesn't damage your hardware, it can ruin your day. You're busy working or playing, and suddenly everything stops.

Leave a Reply

Your email address will not be published. Required fields are marked *